JZY is a terminal manufacturer that supplies a wide variety of copper terminals and supports customization.Twin Insulated Wire Ferrules for 20AWG is one of the commonly used terminals. Its unique two-wire design saves materials and improves utilization. Twin Insulated Wire Ferrules for 2*20AWG is a kind of tubular terminal, can be connected to the double wire, and the end material is selected to be copper material, the terminal is selected to be PVC material, and can be connected to the design of double wire, so that the wiring is more concise, improve the utilization of space.According to the different length of copper pipe, Twin Insulated Wire Ferrules for 2*20AWG will have different specifications, the corresponding price will be different. For specific specifications, refer to the parameters in the details.
As a senior manufacturer and supplier, JZY produces high-quality Twin Insulated Wire Ferrules for 20AWG. The end is made of preferred copper pipe, and the wiring end is made of PVC material, which can be connected with double wires. The overall design is small, can be connected to two 0.75 square mm wire, end length of 8 and 10 mm two lengths, the maximum pressure of 105°C 300V, and the end of the tin plating way to prevent copper end oxidation. The following are the general parameters of Twin Insulated Wire Ferrules for 2*20AWG
|
AWG mm² |
ITEM NO |
DIMENSION mm |
|||||
|
F |
L |
W |
B |
D |
C |
||
|
2*22AWG 2*0.5mm² |
TE0508 |
8.0 |
14.5 |
5.0 |
6.5 |
1.8 |
1.5 |
|
2*20AWG 2*0.75mm² |
TE7508 |
8.0 |
14.5 |
5.5 |
6.7 |
2.1 |
1.8 |
|
TE7510 |
10.0 |
16.7 |
|||||
|
2*18AWG 2*1.0mm² |
TE1008 |
8.0 |
15.1 |
5.5 |
7.1 |
2.3 |
2.0 |
|
TE1010 |
10.0 |
17.1 |
|||||
|
2*16AWG 2*1.5mm² |
TE1508 |
8.0 |
15.5 |
6.4 |
7.2 |
2.6 |
2.3 |
|
TE1512 |
12.0 |
19.5 |
|||||
|
2*14AWG 2*2.5mm² |
TE2510 |
10.0 |
18.5 |
8.0 |
8.5 |
3.3 |
2.9 |
|
TE2513 |
13.0 |
21.5 |
|||||
|
2*12AWG 2*4mm² |
TE4012 |
12.0 |
23.1 |
8.8 |
11.1 |
4.2 |
3.8 |
|
2*10AWG 2*6mm² |
TE6014 |
14.0 |
26.1 |
9.5 |
12.1 |
5.3 |
4.9 |
|
2*8AWG 2*10mm² |
TE10-14 |
14.0 |
26.6 |
12.6 |
12.6 |
6.9 |
6.5 |
|
2*6AWG 2*16mm² |
TE16-14 |
14.0 |
31.3 |
19.0 |
17.3 |
8.7 |
8.3 |
1. Material selection
Twin Insulated Wire Ferrules for 2*20AWG selects high quality copper raw material, good conductive effect and stable performance. Insulation material selection of PVC material, insulation and flame retardant.
2.Design
The Twin Insulated Wire Ferrules for 2*20AWG copper end is made of seamless copper tube, and the outer layer is coated with tin film to protect the copper end from oxidation. The insulating end can be connected to double wire, improve the utilization of space.
3.Install
Step 1: Prepare the terminal and wire and peel off the wire casing. Step 2, plug the wire from the insulated end to the copper end. Step 3, press the copper end with wire crimping pliers.Three steps to complete the wiring.
Advantages of purchasing Twin Insulated Wire Ferrules for 2*20AWG in bulk
As a supplier, JZY thinks from the perspective of consumers about how to purchase Twin Insulated Wire Ferrules for 2*20AWG to maximize the benefits. In bulk, of course. In the case of sufficient raw materials, mass purchase, can save costs, and the choice of transportation mode is more advantageous.
