JZY is a leading China Non-Insulated Ring Terminals for 8AWG Wire manufacturers, suppliers and exporter. Non-insulated ring terminals for 8 AWG offer the safety and security that other types of terminal connections cannot because, in order for the terminal to be removed, you must remove the screw holding the terminal. Non-insulated ring terminals are used in areas where insulation is not needed. Easy to use, all you need is a crimping tool. These non-insulated ring terminals are an inexpensive solution when protection from electrical current is not a necessity.
Find a huge selection of Non-Insulated Ring Terminals for 8AWG Wire from China at JZY. Non-Insulated Ring Terminals for 8 AWG are used to connect wires to a connection point by fitting the open face of the terminal over a stud. They create a solid connection as the ring that is fitted over the stud cannot come loose or fall off
ITEM NO. |
THICKNESS |
DIMENSIONS(mm) |
WIRE SPECIFICATION |
PCS |
||||
---|---|---|---|---|---|---|---|---|
BOLT OPENING DIAMETER |
B |
L |
DΦ |
dΦ |
||||
RNB8-5S |
1.2 |
5.3 |
8.8 |
24 |
7.2 |
4.5 |
6~10mm2 |
500 |
RNB8-6S |
1.2 |
6.3 |
12 |
23.8 |
||||
RNB8-8 |
1.2 |
8.3 |
15 |
29.8 |
||||
RNB8-10 |
1.2 |
10.4 |
15 |
29.8 |
||||
RNB8-12 |
1.2 |
13 |
20 |
33.5 |