JZY manufactures Non-Insulated Pin Terminals for 16-14 AWG and various types of cord end terminals and plug-ins, and supplies terminals to meet customers' requirements for terminals. JZY is a terminal manufacturer and supplier.
Non-Insulated Pin Terminals for 16-14 AWG is made of preferred copper, the surface is coated with tin and anti-oxidation, the rust protection period is prolonged, the end length is varied, the wire can be connected to the range of 1.5-2.5 square mm, the model is selected, the thickness is 0.8 mm, the maximum current can be passed through is 27A.
The table below specifies the wiring range and size of Non-Insulated Pin Terminals for 16-14 AWG
ITEM NO |
DIMENSION |
||||
---|---|---|---|---|---|
FФ |
L |
E |
DФ |
dФ |
|
mm |
mm |
mm |
mm |
mm |
|
PTN2-9 |
1.9 |
13.8 |
4.8 |
4.1 |
2.3 |
PTN2-10 |
1.9 |
14.8 |
4.8 |
4.1 |
2.3 |
PTN2-12 |
1.9 |
16.8 |
4.8 |
4.1 |
2.3 |
PTN2-13 |
1.9 |
17.8 |
4.8 |
4.1 |
2.3 |
PTN2-18 |
1.9 |
22.8 |
4.8 |
4.1 |
2.3 |
![]() |
There are 5 kinds of Non-Insulated Pin Terminals for 16-14 AWG end length, of course, not limited to a few lengths, if you need other specifications of products, you can be customized, the wiring range of these types of products is the same, are 1.5-2.5 square millimeters. |
The Non-Insulated Pin Terminals for 16-14 AWG connection is stable, the press line is not cracked, not easy to fall off, the connection is firm, the use of stable performance, excellent copper core, large load, small resistivity, good conductivity. |
![]() |