JZY is a Chinese manufacturer of copper terminals and a supplier of terminals sold around the world. Non-Insulated Blade Terminals for 12-10AWG is a pure copper end, tin coated, and flat end with stripes for more stable installation.Non-Insulated Blade Terminals for 12-10 AWG produced by JZY are widely used in large electrical equipment, small electrical appliances, technical engineering and other fields.
Non-Insulated Blade Terminals for 12-10AWG is the selection of the most stable metal copper raw materials for production, each process is strictly checked, but also passed the ISO9001:2008 quality management system standard, the outer layer of tin plating, forming a protective film to prevent copper from chemical reactions in the air for a long time. And wholesale Non-Insulated Blade Terminals for 12-10 AWG can enjoy more benefits, whether in terms of price, transportation or service, will provide you with a better experience.
Type: cold press bare terminal
Series: DBN series
Material: Copper
Production process: copper tin plating
Maximum current: 48A
Thickness: 1.0mm
The table shows the specific parameters of Non-Insulated Blade Terminals for 12-10 AWG
|
ITEM NO |
DIMENSION（mm） |
Traverse section |
||||||
|---|---|---|---|---|---|---|---|---|
|
W |
F |
L |
E |
D |
D1 |
AWG |
mm2 |
|
|
DBN5.5-10 |
2.8 |
10.0 |
16.0 |
6.0 |
5.6 |
3.4 |
12-10 |
4-6 |
|
DBN5.5-14 |
4.5 |
14.0 |
20.0 |
|||||
|
DBN5.5-18 |
4.5 |
18.0 |
24.0 |
|||||
Non-Insulated Blade Terminals for 12-10 AWG uses steps to demonstrate,
Advantages of Non-Insulated Blade Terminals for 12-10 AWG and sheathing used together,
The terminal can conduct electricity, and the sheath can be insulated and waterproof and flame retardant, which can better extend the service time and protect the circuit from environmental effects.
